Part 1Part 1 of 3:Making Sure Your Pranks Don't Go Too Far1Check your employee handbook for rules on

Method 1Method 1 of 3:Scary Design Ideas1Look intimidating with a skull mask. Grab a black fabric ma

Part 1Part 1 of 3:Preparing Your Baseboards for Painting1Lay a drop cloth down along the wall you’re

Method 1Method 1 of 3:Applying the Fixative1Pick up a can of archival fixative spray from your local

Part 1Part 1 of 3:Drawing Your Design1Wash and dry the pebbles to remove any dirt. Find a variety of

Method 1Method 1 of 4:Mixing the Paint1Set up a workspace and wear safety gear. Lay down tarps or ne

Method 1Method 1 of 2:Priming with a Shellac Spray1Purchase a can of shellac spray primer. Go to a h

Question 1 of 7:Do you need to strip chalk paint wax before repainting?If you’re repainting chalk pa

Part 1Part 1 of 3:Preparing the Project1Clean bare aluminum with warm water and a degreasing agent.

Method 1Method 1 of 3:Creating a Template on Paper1Plan out your chevron pattern. Before you start p

1Clean your piece of furniture thoroughly.Use a vacuum to remove any dirt and dust before you start

Method 1Method 1 of 2:Drying Paint with a Heat Gun1Plug in your heat gun and set the temperature to

Part 1Part 1 of 3:Getting Ready to Carve1Set up a large, flat workspace. Carving Hebel is best done

Question 1 of 8:Can I use a handsaw to cut acrylic tubing?Yes, any saw will work on acrylic as long

Method 1Method 1 of 2:Dipping Pine Cones in Paint1Choose either latex or acrylic paint for your proj

Part 1Part 1 of 3:Gathering Materials1Choose a bar of soap. Any soap will do, but the harder the soa

Method 1Method 1 of 2:Creating a Marble Effect1Choose a well-ventilated area and protect your worksp

Method 1Method 1 of 3:Gathering Supplies1Choose a palette knife or painting knife. Although the two

Part 1Part 1 of 3:Choosing Paints1Choose 4-5 colors that match the surroundings you want to blend in

Part 1Part 1 of 3:Organizing Your Workspace1Clean the work surface and cover it with plastic sheetin