1. Home > Common Sense of Life > Work World

How to Raise Rabbits for Food

Method 1 Method 1 of 3: Raising Rabbits
  1. 1 Rabbit breeding stock can be obtained from many different sources. One good way is to go to a fair where there are rabbits and contact the owners which are usually listed on the show cases.
    • 3 to 4 litters of 5 to 10 young can be thrown by a healthy, mature female (doe) each year.
    • One male (buck) can service up to twenty to thirty does, but in order to keep the gene pool healthy, you should have one buck for each 5 does. Make sure you keep records of which does are bred by which bucks, and keep rotating the animals to keep the gene pool as large as possible.
    • The best meat breeds are California and New Zealand or a combination of the two. Most consider the Flemish Giant unsuitable for a meat rabbit, due to the meat to bone ratio, also the amount of food consumed to meat ratio. It is okay to cross with a New Zealand for meat production.
  2. 2 Get the right pen. The pen should be a minimum of 5 feet (1.5 m) by 6 feet (1.8 m) for this large breed, but slightly smaller for the smaller breeds. Rabbits need space! The floor should be made of a sturdy wire mesh with about ⁄4 inch (1.9 cm) square holes to accommodate droppings and urine. Do give the rabbit someplace else to stand, however. Standing on wire full time can hurt a rabbit's feet. A full tray or box the full size of the floor of the pen with all four sides about 2 ⁄2 inches (6.4 cm) high should be slid under the pen to catch the animal waste. This tray should be emptied once per week and rinsed with a disinfectant. Be careful when using bleach, as it will react with the urine and give off a harmful gas!
    • A solid compartment about 1 ⁄2 feet (0.5 m) long and 1 ⁄2 feet (0.5 m) wide should be included in the pen to give the doe privacy while she is having her young. this will keep mortality of the young down to a great extent. Be sure there is plenty of dried hay in the pen when she is "due".
  3. 3 Know that female rabbits will conceive at any time they have an "encounter" with a buck. There is no set estrous period.
    • The young should be separated from the mother at about 6 weeks.
    • The doe is ready for breeding immediately after separation from her young.
    • The rabbit pregnancy period is 28-30 days, with the doe able to mate within hours of giving birth. However, it's advised to wait a month so as not to overtire her and drastically shorten her life span.
  4. 4 The pen should be furnished with clean water each day. The water should be contained in such a way that the animal will not contaminate it with its body waste. If in an open container, it should be elevated so that the top is at least 4 inches (10.2 cm) above the floor. Conventional water bottles work very well also (except during the winter).
  5. 5 Feed a good quality hay. Be sure it has a sweet smell, and has not been water-damaged and become moldy. Red clover and birdsfoot trefoil seem to be the most preferred by rabbits, but they will also do well on alfalfa, Kentucky bluegrass, timothy, and a mixture of native grasses.
  6. 6 Hay should be contained in a lattice manger, or rick to keep it from being contaminated by the animal's waste. Do not over feed lettuces. Any fresh green food such as lettuce from the store or grass from the yard can give your animals diarrhea! However, if they are introduced to grass or weeds gradually, they can enjoy them regularly with no harm. It's the sudden change of food that is most harmful. Also, with free choice hay, the animals will regulate much of their own eating habits.
  7. 7 Another feeding option can be to use calf manna along with rabbit pellets, or "rabbit food". Medicated calf pellets, available at a feed mill which dairy farmers frequent, can help keep your rabbits free from diarrhea. They will cost you less than the "bunny" pellets per pound, but can contribute to the overuse of antibiotics and are not available in all cities. Very important: When you are ready to butcher, place your animals in an especially clean environment for 2 weeks prior to slaughtering and feed them conventional rabbit pellets rather than the medicated calf food to clear the rabbits from the effects of the anti-biotic which is in the calf food. Remember these rabbits will not be considered organic which is a personal choice.
Method 2 Method 2 of 3: Enjoying the 'payoff'
  1. 1 The first is to sell them to a meat processing plant, the second is to slaughter and butcher them for your own use, or to sell the meat after you have processed it.
  2. 2 To locate a meat processing plant, the best thing to do is go to different grocery stores and ask where they are buying their meat from. Explain that you are thinking of raising rabbits and are researching the market possibilities. Many of them will be happy to help you.
  3. 3 When you have located several markets who might buy your product, contact them and see if they would be willing to purchase live animals from you. If possible, set up a contract with them to produce whatever you feel you are able to.
  4. 4 Wisdom tells us that you should have a good sound business plan worked out before you even start to raise a single rabbit.
  5. 5 To slaughter, attach two stout cords to a bar about 2 feet (0.6 m) above your head and about 2 feet (0.6 m) apart. The lower end of the cords must have a slipknot on each of them.
    • You will need a 12" to 18" length of ⁄2 inch (1.3 cm) pipe to kill the animal. You will also need a keenly sharpened knife to skin and eviscerate the animal. You will need a pan to place the carcass of the animal in after you have skinned and eviscerated it.
  6. 6 Remove the animal from its cage, seize it by both hind feet with one hand, and insert one of its hind feet, on the toe end of the joint, but just below the first joint, in one of the slip knots, so that the belly will end up facing you.
  7. 7 Slip the other foot in the remaining slipknot likewise.
  8. 8 While the animal is hanging, pull its neck out straight and seizing the pipe with the other hand, give a quick sharp hard blow where the neck and skull of the animal meet, being sure you don't hit your own hand. If you have done this right, the animal is for all intents and purposes, dead.
  9. 9 With your sharp knife, remove the head, being careful to keep the blood from getting on you. Give the carcass a little time to bleed out
  10. 10 With your sharp knife, remove the front feet.
  11. 11 Skin the animal according to whether you want to save the pelt or hide. Rabbits are very easy to skin. If you don't want to save the hide, simply cut a slit in the small of the back and pull the lower part down and off.
  12. 12 Cut the tail off close to the carcass, cut the skin around the feet hocks. Slit the skin from the feet to the belly on each side, Then slit the skin (but not the belly) on down to the end.
  13. 13 When the skin is off, slit the belly meat from the crotch on up through, and part the ribcage through the breast plate on up to the neck.
  14. 14 Using your sharp Knife, cut through the front of the pelvic bone, being careful not to cut into the anal canal, which will be filled with feces.
  15. 15 Remove all the visceral matter from the carcass.
  16. 16 Save whatever internal organs which you desire, such as the heart, liver and kidneys.
  17. 17 Cut off each hind foot, leaving it in the slipknot.
  18. 18 Place carcass in the container and chill immediately. You may save the meat for later cleaning, quartering, butchering, cooling, cooking or freezing.
Method 3 Method 3 of 3: General Rabbit Information
  1. 1 Mature bucks should not be kept in the same pen, as one or both will be castrated by the other.
  2. 2 Rabbits are sensitive to too much heat, and the pen should be shaded and well ventilated in the summer.
  3. 3 In the winter, the pen should be protected from wind, and most of its screen areas should be covered. Be sure to keep plenty of hay or straw in the pen for bedding.
  4. 4 Rabbits reach maturity somewhere between 6 and 10 months of age depending on the breed. Smaller breeds mature quicker than larger.
    • The following breeds will weigh approximately this much when fully mature; Netherland Dwarf 2 1/2 lbs., Jersey Wooly 3 1/2 lbs., Holland Lop 4 lbs., Mini-Rex 4 1/2 lbs., Dutch 5 1/2 lbs., Havana 5 1/2 lbs., Florida White 6 lbs., Mini Lop 6 1/2 lbs., Rex 9 lbs., Palomino, 10 lbs., Satin 11 lbs., New Zealand 11 lbs., French Lop 12 lbs., Flemish Giant 13+ lbs.
  5. 5 Pellets should be fed to rabbits in the following portions; Dwarfs 1/2 cup per day, Mini-Lops 3/4 cup per day, Larger rabbits 1 cup per day, Flemish Giant 1 1/2 cups per day.
  6. 6 Clean each pen at least once per week, throwing out all bedding material, and replace it with new, clean bedding.