How to Mount a Bicycle_Cars & Other Vehicles_Common Sense of Life

Method 1 Method 1 of 3: Side Mount Method

1 Stand on the left side of your bicycle.
2 Position the left pedal at the 10:00 position (as on a clock).
3 Put your left foot on the left pedal.
4 Push off twice on the ground with your right foot, as this will give you enough momentum to swing your right leg over the seat without falling off.
5 As your bicycle begins to move, swing your right leg over.
6 Sit down on the bicycle seat and pedal away. Note: If you feel comfortable starting on the right side of the bicycle and pedaling first with the right foot, that's fine too.

Method 2 Method 2 of 3: Ready Mount Method

1 Throw your leg over the middle bar and stand flat-footed with one foot on each side of the bike. You should be standing just in front of the bike seat, and not fully seated yet.
2 Position one pedal at 10:00 and place your foot on the pedal while leaning a little to the other side. Your other foot which is still flat on the ground will help you keep your balance.
3 Push down with the foot on the pedal, and stand up on it at the same time. This will raise you up and allow you to sit on the seat.
4 Place your other foot on the pedal, push forward and you are riding!
5Probably want to apply some brake pressure so the bike won't run away

Method 3 Method 3 of 3: Cycle-cross Mount Method

1 Wear a helmet. This method is not easy.
2 Start with the left pedal at ten o'clock and stand on the left side of the bike, holding the handlebars.
3 Run alongside the bike, pushing the bike by the handlebars until you get up to speed.
4 When you're ready to mount, jump off the left foot and swing your right leg over the bike. You should land with your right thigh on the seat.
5 Push down on the left pedal and catch the right pedal on its way up.

How to Mount a Bicycle